So I had a flight today from EGLL to LSGG, and along the way on my desecent it asked me to go from what I assumed was fl 12 (12000 ft) to fl 90 (9000 ft) I'm confused because when I got there it kept yelling at me that I had not hit my altitude. I was using the qnh it had set for me by the ATC. It didn't mean go up to 90k ft did it? That would make no sense 8 minutes from the airport.
↧
What is flight level 90? I'm confused.
↧
RC window issues
I'm having a new issue with rc both in Fsx abd P3d v3.2.
Most of the options appear and work fine with the rc window: ATIS, clearance, ground, tower, etc.
But a couple of the options seem to be missing:
1 when climbing or cruising, I get a request higher option, but no request lower option.
2 When approach assigns me a runway, I get no option for choosing an alternate runway. This happens with both simulators and at all airports.
Anyone heard of these issues? Any fix come the mind?
Thanks.
Dan Cole
↧
↧
FSUIPC option question
I found thanks to someone on this forum two options in FSUIPC that basically keep FSX in real time, one of them changes fs time to whatever the real world time is supposed to be, the other keeps it synced within however many minutes, I turned this second option off, after trying it out because I thought that it might confuse RC4, is this second option confusing to RC4 in any way?
↧
Radar contact speed restrictions
Hi,
I've noticed that aside from the 250 knot speed restrictions given by approach on initial contact I am not getting the 230/210/180 speed restrictions on downwind/base/final vectors.
This was working in the past but no more.
What could be the issue?
Shomron
↧
Activation
Is RC activation still active and alive ?
I have sent 2 emails and waiting 2 days without any feedback.
Usually i had feedback within hours...
↧
↧
off the RADAR
Hi guys,
radar contact is the best atc I have used by far but its so annoying that when you buy it you then have to email for your key.
Then its even more annoying when you lose it from your pc and visit your download link only to find out it no longer exists.
i've emailed 5 times now over the last 3 months and had nothing back.
annoyed is an understatment
anyone know where i can download it from
thanks
↧
RC4 with Concorde
Good evening,
I've been using RC4 very successfully with PMDG747 for a couple of years now.
Having just updated my FSLabs Concorde to the latest version, I'm getting:
"IPC Request contains bad data" when I try to start RC4 with Concorde.
I'm using the same FSX launch procedure as with the 747, apart from starting with the default Cessna and then changing to Concorde as per the FSLabs advice.
Any ideas, please?
TG.
(Please be aware that I'm a pensioner with only a basic computer knowledge!)
↧
dll error
Getting the 713 error. Read everything in prior locked threads; but nothing works. I have windows 8.1. I get it to recognize the dll; but still get the error. So frustrating. Please help.
↧
ATC directions to the airport were too close and high for landing?
I've just started flying regularly for the first time in a very long time, and I remember this happened on occasion, but not if there was anything I could do about it? When I hit t the localizer I was far too high to actually land safely and would likely had to have gone around and tried again.
↧
↧
Practicing go arounds?
This last time I got told to go around, and I've always really just ignored it because it happens a lot but I do want to practice it, is there a way I can set it up to practice during landing with RC4?
↧
Haven't received activation key
I sent my key request about 26 hours ago, and then read through some other threads and sent another one using plain text mode about 3/4 hours after that, and still haven't received any keys. This is the format I used (Obviously replacing firstname and lastname with my name):
-20686670 ! FIRSTNAME ! LASTNAME
First time customer, purchased it a few hours before sending in the key request.. I saw that some people emailed jd@jdtllc.com about this, so I did, but still many hours later I haven't heard anything.. really wouldn't like to see 40GBP go to waste 
↧
Auto-Tune
Been using RC forever and suddenly auto-tune doesn't work. Do I need to re-install RC. Don't have my original download. Do I need to contact John Dekker?
Thanks all,
Jeff
Rocklin, CA, USA
↧
Thanks
... for saving my Saturday. Another Windows repair -- another key request. I thought that was my weekend over but the key arrived within ten minutes.
Everything's smiley again now. I hope all is well with the RC team.
Best regards,
D
Everything's smiley again now. I hope all is well with the RC team.
Best regards,
D
↧
↧
Is there a way to tell RC what kind of aircraft you are?
I've heard it learn what kind of aircraft I am flying, but is there a way to tell it before you fly what kind of aircraft beyond turbo prop, heavy etc? Can I tell it someplace I'm flying a "Dash 8?"
↧
Update RC4.3 to match the actual existing runways.
I have just ran the latest makerwys.exe from Peter Dowsons website. I put the file in the main FSX directory but the r4.csv file in RC4.3 did not update but the r5.csv in the FSX folder did update. Can someone tell me how to fix this problem so that I have the correct runway listing in RC4.3?
Thanks
Don
↧
How to get an RC exe again for reinstalation
Hello,
I purchased RC last year and I changed my OS in march.
Everything including FSX and other fsx apps disappeared. So i need the installation file of RC. When i follow the link provided after purchasing it says that the link has expired. I have already written an email to info@... but no reply whatsoever.
Please help me or return my money back. 50 euros it is :)) joking. just give me the exe file please.
I love RC by the way, the simplest though the best atc on the market.
Best regards,
↧
ILS Frequencies in RC4
Good evening,
Having just bought the new Frankfurt Airport, I've just landed there for the first time in my favourite PMDG 747.
I requested 25R, so I could try out the bridge over the motorway (Autobahn?) and all went smoothly.
However, the ILS frequency shown in the RC4 ATC box differed from that shown in the 747 FMC.
It seems that the latter is the correct one, as I did an autoland on the desired runway.
It's a small point, but how can I get RC4 to display the correct frequency, please?
(I ran Make Runways after the EDDF installation and I'm on the latest Nav Data information.)
↧
↧
No Activation Key
Greetings,
I've sent the following request:
716746807 ! Matthew ! Merrill
However, I think there may be a problem with this request since I think I've had problems with this before. When I first got RC4 I think my email address was mattm@blarg.net. Now that it's changed to M a tt merrill AT c om cas t DOT NET I think the system either sends to the wrong email or fails on the request.
is there any way to find out if this is the case?
Thanks,
-Matt
↧
Rebuild has no effect
Hello
I am used to rebuilding my scenery DB using the command button in RCv. My fs9 path is d:\fs9.
I just wanted to do it today but although the process starts and finishes, nothing is updated. In fact the process takes 1-2 secs when it used to be more in the 15-30secs the last times I did it.
I haven't changed anything to my setup and RCv4 works fine otherwise.
Thank you
Ghiom
↧
IPC Request Contains Bad Data
I recently started having IPC Request Contains Bad Data errors when attempting to open Radar Contact. I normally generate my flt plans from PFPX, but also attempted to load Flt plans from FS Build, and even FSX , with no help, same error. Only change I made to FSX was run makerunways. Appreciate any help or advice.
↧