I too need a reactivation key for radar contact. I sent an email to Register@jdtllc.com and it came back as undeliverable.
Edward ! Harper ! 406738490
↧
RC Re-Activation
↧
Stuck on repeat mode
since I'm a beginner with talking to atc it takes me longer to reply to the atc delivery and it started to repeat itself making radar contact 4.3 program not responding and it keeps repeating it self even when I try to acknowledge it with button 7 it does not work spamming that key doesn't work either anything I can do about this ?
↧
↧
How to compensate for exceptionally long SIDs?
Try flying this route:
KDEN STAKR3 PYPER PNH J17 ABI DILLO LAIKS1 KAUS IFR FL330
You'll notice that the STAKR3 SID runs pretty long and ATC will bark at you for 'straying off your flight plan' before the SID is complete. Is there a way to adjust the distances RC4 will honor before connecting to the exit point? (PYPER in this case)
↧
Off Route Of Filed Plan
Every once in a while I get message saying I am off my flight plan that I filed. I will clearly be going direct to my next waypoint and on the route I filed. What cause this? I get the msg to turn to a hdg until receiving suitable for navigation. Here is the Route KBAK to KCLE@25000 (Alt1- , Alt2-) / SHB.ROD.LAWTO.MFD.ZABER.JAKEE. *RVSM
↧
No way of getting "SCANDINAVIAN" instead of "SIERRA"
HI, I have been trying all the day to make RC4.3 say "Scandinavian" instead of "Sierra" with UT2, but without success. I checked c4.csv and it's correctly written "SCANDINAVIAN,SCANDINAVIAN,Scandinavian Airlines System (SAS) - Sweden,0, 0", while in Aircraft.cfg I have "atc_airline=SCANDINAVIAN". Further, the "Scandinavian.wav" file is present in all ATC folders inside Winwood folder.
I increased the spawn distance in UT2 to 40 Nm, but there is no way... This happens both on the ground and in cruise.
Other airlines are correctly spoken.
What else could I try?
Thank you!
↧
↧
RC4 & FSX:SE
Evening,
I am about to do my first reinstall of FSX for about 3 years on a new PC. Could i just check is RC4 compatible with FSX Steam Edition and if so is there any special instruction to installing it ?
Kind Regards
↧
RCv4: Audio stops playing
Hi,
I'm using RCv4 with P3D in a network configuration on a second PC (using WideFS).
I'm having some problems with the ATC audio, which is set to output to the network PCs built in speakers. All works well when I start a flight but at some point the audio stops playing (even though RC is still running).
Sometimes I can get the sound to come back by switching the output within windows to my USB headset. I'm also using Simphysics on the networked PC and sometimes closing this program mades the audio play again on the speakers - but not always. It seems as if something is causing a conflict. What I'd really like is to have the audio play via the speakers without any interruption.
Any ideas?
Thanks,
Dominic
↧
runtime error 713
I know this has been beat up many times, which surprises me this error is still around.
I running RDC on a second machine. I have all proper drives shared and mapped. Fsuipc, widefs, etc. In fact i have
Flightsim commander running fine on my second computer.
I keep getting a runtime error of 713.
I have done all the procedures in the CMD (with administrator rights) window, with hopeful success. I also put the msstdfmt.dll in windows folder system32 and syswow64 folder, on both machines.
I'm sure I'm missing something here , i just cant figure it out.
I have radar contact loaded on my second machine, and widefs. wifefs shows connected.
when radar contact first opens it wants a flight plan.
Is not the FSX flight plans in documents. should not i migrate over to that folder in my main docs folder on com one.
That is where i try to load a flight plan and get the runtime error.
What am i missing folks. Like i said this has been beat to death.
I may be putting it in the CMD wrong, but it says i succeded in getting it done.
Help....Thanks
Im running Windows 10
RobertC
↧
Been Away
All, please forgive my ignorance. I have been away from simming for awhile. Does RC4 work with xplane and is it still available.
↧
↧
Very long ILS approaches
I've noticed when flying into smaller airports with an ILS approach, I'm sent downwind for over 50 miles. One time, I was sent so far downwind that when I was finally turned for the 50 mile final, I was vectored into a mountain.
Thanks,
Matt
↧
RC4 working but menu window not visible.
Hello all - long time since I've had to post here. Searched for this problem but no luck.
RC4 works but the transparent menu window does not show up. I know that 1 will get me clearance, 7 acks but it soon gets more difficult, especially if I miss a waypoint and am told I am off course. Then I want to request direct to but, of course cannot see which numbers to key.
This has happened without me doing anything that would be likely to cause a problem. I have a paid for FSUIPC and the latest version. I am using Windows 10 but it has worked ok in this up till recently.
Any ideas as to what I can try please?
Iain Smith
↧
Approaches not displayed
Hi All
I opted for a full IAP to LIRF (ISD scenery for FS9) recently but the full list of runways was not displayed......the northerly runways 34L and 34R were not displayed as options.(16C/34C) is not on the scenery.
The missing runways appear to be in the.csv files (detected OK by makerunways) and they are OK
in the airac files.
Can you suggest why this happened please.
David Ireland .UK
↧
Using Super ATC / IYP with RC 4
Is anyone using the voice recognition software such as Super ATC / IYP with RC 4?
If so how does it work?
I am looking at RC4 vs Pilot2ATC and VoxATC as well.
Thanks!
↧
↧
Run time error 75
Hey guys,
I've hit a wall with a problem I'm having getting RC to work properly with FSX. I keep getting a 'run-time error 75 : RadarContact.fsuipc.rcv4code' when I click for clearance delivery once I've started RC. I have up until this point had no problem running RC on my computer which has a Windows 10 OS and Kaspersky Antivirus software. Disclaimer: I noticed this issue last night when I was playing FSX for the first time in 9-10 months. I'm not aware of any major changes made to my computer since then that could interfere with RC, which, as I mentioned has never given me a problem before. To troubleshoot, I ran RC as an administrator and then checked Kaspersky settings to make sure RC was listed as a trusted application, which it was. Those two things didn't work. I then uninstalled RC and reinstalled it and ran the program in FSX. At first, the clearance delivery went through and I thought the issue was solved. I closed out of RC and proceeded with my pre-flight setup. When I went to restart RC, I received the same error notice. I'm not sure what to do or what's preventing the program from operating correctly. Another disclaimer: my computer was upgraded to the Windows 10 OS from windows 7 OS. I can't remember if the upgrade occurred since I last played FSX but that could be a factor. Thanks in advance for your help in this matter.
Corey
↧
Menu window displays one page only
Post deleted.......Not RC problem
↧
No code for registering coming my way
Hi, I am still waiting for the code to re-register RC4 - it's been more than 36 hours now.
I first sent it from the wrong email and received a Reply almost immediately, but after sending it from the right one: Nothing.
Can someone help?
Thanks
↧
Key Strokes in RC4 for Voice Control?
Hi Folks,
Just recently started using "Voice Attack" to control RC4... Wow - seriously breathes new life into this software and makes it much more enjoyable... Voice recognition seems almost perfect these days and it seldom misses a command...
Would anyone have a list of keystrokes used with RC4 (besides the 1,2,3,4,5,6,7,8,9,0) that we routinely use ???
Wasn't there a command to "repeat last" in case you missed it ???
Then there was "transfer to copilot" ???
Anything else I am missing ???
Thanks...
Regards,
Scott
↧
↧
Activation Key Request
I've sent innumerable emails to the automated address using just as many formats to induce the number generator to email me, all to no avail. Can anyone assist me, its been 24 hrs since purchase and quite honestly ........
Chris.
↧
Missing MSSTDFMT.DLL
Hello
I have bought a new version of RC4 and installed as Administrator with virus and firewall disabled. I was able to register with the key I was given and when I try to use the program I get the following message
Class not registered
You need the following file to be installed on your machine
MSSTDFMT.DLL
I am using OS Windows 10 WITH Intel-Core i7-6500 CPU @ 2.5GHz 2.60 GHz. Please advise a solution or provide a new download link.
I am running the program as Administrator.
Thanks
Phildaby (Phillip)
↧
Registration code
Hi All,
I hate to feel like a nag, but I sent a note to the automated registration address yesterday, and have yet to hear back. I've checked my junk mail repeatedly, and it isn' caught in there.
Thanks for looking into this when able. :)
I hate to feel like a nag, but I sent a note to the automated registration address yesterday, and have yet to hear back. I've checked my junk mail repeatedly, and it isn' caught in there.
Thanks for looking into this when able. :)
↧